This machine will do loose ground or fresh ground with bean grinders to provide that fresh brewed cup of coffee or specialty drink every time. This machine will vend french vanilla, cappuccino, mocha, hot chocolate, soup, ect. This machine has new black vinyl fronts & new black semi gloss paint. This machine refurbished can be presented to your account as a much newer nicer machine that would have cost much more.
Dimensions: Height:72 Width: 38 Depth: 28 3/4
Standard 110 volt Learn More
The Vendo Vue 30 soda vending machine is the little brother to the Vendo Vue 40. If your familiar with the vendo vue 40 then you are already familiar with the 30. The only difference is the size of the cabinet as the 30 is a narrow cabinet machine. This machine is cutting edge technology with a robotic delivery arm that goes and gets the customers product and safely delivers it to the product delivery bin. This reduces fizz and spills related to shaken product in standard bottle drop machines. This machine is MDB (multi drop bus) allowing third party accessories to be added with no extra programing or wiring needed. This machine is credit card ready just plug and play, also can handle remote monitoring devices, larger currency acceptors & bill recyclers. This machine gets new black paint on both sides top & front when applicable. This black semi gloss acrylic enamel paint leaves a like new finish that is very hard leaving your machine looking new for many years to come. We have rebuilt the refrigeration system using epa safe R-134a refrigerant. Impress a client with a space issue or a smaller client with this reliable and attractive newer glass front soda vending machine. Learn More
The Crane National 148 snack vending machine has long been a reliable go to for vendors looking for a deep machine with a narrow cabinet. The narrow but deep cabinet allows it to fit in accounts with limited space or with limited use to cut down on expires increasing profitability in your route. This machine comes standard with dual spirals something none of its counterparts did at this time in vending. This machine looks great and is very simple to program and trouble shoot. We always do body work to bring the cabinet to a clean square look when refurbishing our machines. This machine has multiple coats of a durable black semi gloss acrylic enamel paint. This paint leaves a brand new shine and hard durable quality keeping your machine looking new for years to come. We also put new rugged black vinyl on the front and replace all the selection labels and price labels. With our custom led light tube this machine will draw any customers attention creating more impulse buys generating more revenue for you. Learn More
The Crane National 147 snack vending machine has been a staple in the vending industry for years when it comes to reliability. Un-like many of its counter parts it comes standard with dual spirals and was one of the first to market with this feature. Offering 40 different selections and a deep cabinet this machine can handle the largest of accounts and still function at a very reliable rate. Our process for refurbishing this machine is very extensive and ensures you get a high quality product. We sand the machine down to bare metal to assure we remove any rust and expose any imperfections in the cabinet we should fix. We then add multiple layers of heavy metal specific black semi gloss paint. This paint leaves a show room finish and dries hard to create durability and remain looking new for years. Learn More
Used tested working control board for vendo soda vending machines model vec 5.1 5.2 5.2A 5.2B. This board will fit a vendo 480 510 vmax univendor & many others. Please call the factory to confirm what will fit your machine. This board is an MDB board and will run any MDB coin mech & bill acceptor. This board will not allow you to run a credit card processor if you need to do that you need the next version upgraded of this board we have in stock please call. Learn More
This is a used tested working Digital ready out display board led. Will fit in a royal 650 660 804 all royal Merlin series, 480, and all redbull royal soda vending machines. Comes with harness. Learn More
Coinco 3340-S Coin Mech single price soda Vending Machine Dixie Narco Vendo Mars, 9370-s, 9300-S, 9340-S, 9360-S. This coin mech will fit in any single price soda or snack vending machine and will work this a coinco ba validator with the jones plug single price harness. This unit is used tested cleaned and working. Learn More
Coinco 9300-L 115 volt 12 pin logic coin changer mech for vending machines. Used tested cleaned and fully functioning unit.
FEATURES
·
For use in electronically controlled vending
machines only
·
Select high or low quarter tube level by simply
flipping a switch
·
Dollar coins can be rejected or accepted by
flipping a switch
·
Heavy-duty D.C. payout solenoids provide fast,
accurate payout
·
Change capacity of $40.55
·
Lightweight, rugged plastic construction provides
dependable, maintenance-free service
·
Provides the fastest and most accurate coin
acceptance of any electronic unit available today
·
Pays out to the last coin in the changer tube to
provide the maximum usage of a bill validator Learn More
Vendo Price Display digital read out. Replacement Vendo display board this will fit Vendo V-Max and Univendor 2 soda machine. This listing is for the display board & harness only Fits 511, 570, 601, 720, 721, 840, 821 Vendo soda vending machine comes with plastic cover. This may also fit many units not listed. Vendo V-Max Univendor 2. Unit is used tested and working Learn More
This is a used tested and cleaned unit all functions work properly. This has the standard 9 pin jones plug and will work in any single price soda machine and many standard snack machines. This unit has the plugs to allow the machine to take a coinco or mars bill validator/acceptor. The mars trc 6800h is unique because it is a teachable coin mech. Meaning over time as the unit gets worn it will lose its tune or ability to accept coin as do all coin mechs. This unit though can be tuned or re-teached to accept. This mech can be tunned to accept the new gold $1 or a custom token so you can give your accounts refund tokens instead of money which can be lost ect.
Trouble shooting Mars TRC 6800h coin mech acceptor
How to tune Mars TRC 6800h
To tune your coin mech you will only need your vending machine or bench tester 3 of each denomination of coins and a standard screw driver.
step 1: set the price of the coin mech to the highest price possible (with machine off)
step 2: fold down the flight deck and set the options switches to the following
ON U.S./ Canadian Acceptance
OFF High 25¢ Sensor
ON $ Coin Acceptance
ON $ Coin Acceptance w/o 25¢
step 3: Short the coin mech & send it into tuning mode. This is done by touching your screwdriver to the two tuning pins behind the flight deck below the options switches. While the screw driver is touch both pins turn the machine on for the first time since turning it off in step 1. Your coin mech is now in tuning mode.
step 4: Close the flight deck back into is home position so coins can be inserted into the coin mech.
Insert coins into the coin mech according to the list below
Follow TUNING COIN SET listed below.
Tuning Coin Sets
Coin Set Status
Insert a US nickel Rejected
Insert a US nickel Rejected
Insert a US dime Rejected
Insert a US dime Rejected
Insert a US quarter Rejected
Insert a US quarter Rejected
(at this point you either choose $1 coins or tokens not both)
Insert a US dollar coin Rejected
Insert a US dollar coin Rejected
Insert first token
Insert second token
step 5: hit the coin return lever twice the coin mech should try to reject a nickle. If this process does not work your coin mech is bad and you need to buy a new one or send your current one in for repair. Sending a coin mech in for repair usually cost more then buying another one. Learn More
